Got some time to carve the neck & heel in the daytime and route & shape the bridge in the evening. Here are the results. Everything still needs loads of sanding and filling and there's a bit (0.5mm) wider and longer bridge saddle in the mail. Routing the bridge saddle slot with a dremel tool falls in the category of PIA-tasks. There must be a better way...
 |
| The tuning peg holes are deliberately off-set (well, not all off-setting was on purpose...) to ensure a clear path for each string from nut to post. |
 |
| Once the bridge takes its lemon oil, it's going to fall in with the rest of the tones nicely. Well, the stripes are going to stay perpendicular to the rest... |
 |
| The bridge shape is once again following the SCGC path. |
Ei kommentteja:
Lähetä kommentti